Design and Implementation of a LabView Based 3 Phase Induction Motor Speed Monitoring and Protection System
Design and Implementation of a LabView Based 3 Phase Induction Motor Speed Monitoring and Protection System
Abstract
Three-phase induction motors are one of the main components in various industries. To ensure optimal performance and prevent damage to the motor, a reliable speed monitoring and protection system is needed. Considering the difficulty of technicians or engineers in monitoring induction motors in a factory, this is the main thing that is happening at the moment. In this research, researchers designed and implemented a LabVIEW-based 3-phase induction motor speed monitoring and protection system using a Variable Speed Drive (VSD) and controlled by OUSEAL PLC. The monitoring system design or as an HMI (Human Machine Interface) was designed using LabVIEW software via RS-485 serial communication using the Modbus RTU (Remote Terminal Unit) protocol. To set the desired motor rotation speed, namely by changing the frequency value entering the motor, this setting can be adjusted via the LabVIEW interface. Furthermore, the protection system is designed using the error code feature found on the VSD and uses a thermocouple sensor to protect the motor temperature so that if the system experiences a disturbance, the induction motor will stop automatically and then display the error code or disturbance that occurred. The designed system works in accordance with the design, control and monitoring of the rotation speed of a 3 phase induction motor which can be controlled using the LabView application interface. From the results of the research that has been carried out, it is stated that changes in the frequency value entering a 3-phase induction motor will result in a faster rotation speed of the motor produced.
References
[2] Mk. Amri Rosa and I. Novia Anggraini, “SISTEM PROTEKSI MOTOR INDUKSI 3 FASA TERHADAP BERMACAM GANGGUAN MENGGUNAKAN MIKROKONTROLLER,” J. Amplif. Mei, vol. 10, no. 1, 2020.
[3] A. Rangkuti Riski, Zondra, “2295-Article Text-10765-1-10-20200430,” Articel Text, vol. 14, no. April, pp. 121–128, 2020.
[4] N. Evalina and A. H. Azis, “Pengaturan Kecepatan Putaran Motor Induksi 3 Fasa Menggunakan Programmable logic controller,” 2018.
[5] Y. R. Fauzi, “Perancangan Soft Starting pada Motor Induksi 3 Fasa menggunakan Mikrokontroller ATMega 328,” Inst. Teknol. Sepuluh Nop., pp. 1–131, 2017.
[6] Saverus, “No 主観的健康感を中心とした在宅高齢者における 健康関連指標に関する共分散構造分析Title,” J. Kaji. Pendidik. Ekon. dan Ilmu Ekon., vol. 2, no. 1, pp. 1–19, 2019, [Online]. Available: http://www.scopus.com/inward/record.url?eid=2-s2.0-84865607390&partnerID=tZOtx3y1%0Ahttp://books.google.com/books?hl=en&lr=&id=2LIMMD9FVXkC&oi=fnd&pg=PR5&dq=Principles+of+Digital+Image+Processing+fundamental+techniques&ots=HjrHeuS_
[7] Theodore Wildi, “Teori Motor Induksi Tiga Fasa,” Kementrian Pendidik. dan Kebud. Republik Indones., vol. 2, no. 1, pp. 7–37, 2017.
[8] Y. Badruzzaman, S. Pengajar, J. Teknik, E. Politeknik, N. Semarang, and J. H. Soedarto, “SISTEM MONITORING KENDALI MOTOR INDUKSI TIGA FASA DENGAN VARIABLE SPEED DRIVE BERBASIS PLC DAN SCADA,” 2015.
[9] Agung Bakhtiar, Panduan Dasar Outseal, Outseal Me. Siduardjo, 2020. [Online]. Available: https://www.outseal.com/produk/megav3slim/megav3slim.html
[10] S. Wardoyo, R. Munarto, and V. P. Putra, “Rancang Bangun Data Logger Suhu Menggunakan Labview,” Maret, vol. 4, no. 2013, pp. 23–30, 2013.
[11] D. Artanto, Interaksi Arduino dan LAbVIEW, Pertama. Jakarta: PT. Gramedia, 2012.
[12] D. Nur Prakoso, B. Winarno, and B. Triyono, “MONITORING DAN SISTEM KONTROL VARIABLE SPEED DRIVE (VSD) SEBAGAI PENGENDALI MOTOR 3 FASA PADA CONVEYOR,” 2022.
[13] I. P. A. Putra Novantara, I. W. Arta Wijaya, and I. M. Suartika, “Analisis Pengaturan Putaran Motor Induksi 3 Fasa Dengan Mengatur Frekuensi Menggunakan Variable Speed Drive Di Pt Pdam Tirta Mangutama Kabupaten Badung,” J. SPEKTRUM, vol. 8, no. 4, p. 103, 2022, doi: 10.24843/spektrum.2021.v08.i04.p12.
[14] F. Nugroho W, M. Facta, and T. Sukmadi, “Perancangan Modul dan Perbandingan Metode Starting dan Pengaturan Kecepatan Motor Induksi 3 Fasa,” Transient, vol. 4, no. 1, pp. 58–68, 2015.
[15] D. Kurnia and F. S. H, “Berbiaya Rendah Berbasis Arduino Mega,” Elektra, vol. 3, no. 2, pp. 11–18, 2018.
[16] T. Tosin, “Perancangan dan Implementasi Komunikasi RS-485 Menggunakan Protokol Modbus RTU dan Modbus TCP Pada Sistem Pick-By-Light,” Komputika J. Sist. Komput., vol. 10, no. 1, pp. 85–91, 2021, doi: 10.34010/komputika.v10i1.3557.
